| Propane
Vaporization Chart, Properties and Combustion Data
|
VAPORIZATION RATE -
100 lb. Propane Cylinder (Approx)
| Pounds
of propane in cylinder |
Maximum
continuous draw in BTU/hr at various temperatures in degrees
F. |
|
0° |
20° |
40° |
60° |
70° |
|
100 |
113,000 |
167,000 |
214,000 |
277,000 |
300,000 |
|
90 |
104,000 |
152,000 |
200,000 |
247,000 |
277,000 |
|
80 |
94,000 |
137,000 |
180,000 |
214,000 |
236,000 |
|
70 |
83,000 |
122,000 |
160,000 |
199,000 |
214,000 |
|
60 |
75,000 |
109,000 |
140,000 |
176,000 |
192,000 |
|
50 |
64,000 |
94,000 |
125,000 |
154,000 |
167,000 |
|
40 |
55,000 |
79,000 |
105,000 |
131,000 |
141,000 |
|
30 |
45,000 |
66,000 |
85,000 |
107,000 |
118,000 |
|
20 |
36,000 |
51,000 |
68,000 |
83,000 |
92,000 |
|
10 |
28,000 |
38,000 |
49,000 |
60,000 |
66,000 |
This chart shows the vaporization
rate of containers in terms of the temperature of the liquid and
the wet surface area of the container. When the temperature is lower
or if the container has less liquid in it, the vaporization rate
of the container is a lower value. |
| PROPANE
DATA |
|
Properties
of Propane: |
| Chemical Formula |
C3H8 |
| BTU per Gallon (Vaporized) |
91,690 |
| BTU per Pound |
21,591 |
| Weight per Liquid Gallon |
4.23 |
| Vaporization Temperature |
–44°F |
| Specific Gravity - Vapor (Air=1) |
1.53 |
| Specific Gravity - Liquid (Water=1) |
0.51 |
| Vaporization Rate (Liquid to Vapor) |
272:1 |
|
Combustion
Data : |
| Limits of Flammability, %of gas in air |
2.3%
to 9.5% |
| Air required to burn 1 Cu Ft Vapor |
23.5
Cu Ft |
| Oxygen required to burn 1 Cu Ft Vapor |
4.9
Cu Ft |
| Ignition Temperature |
920-1020°F |
| Optimum Flame Temperature |
3500°F |
| Vapor Pressure at 0°F |
28 PSI
|
| Vapor Pressure at 70° F |
122
PSI |
| Vapor Pressure at 100° F |
190
PSI |
|
Propane Vapor Pressure
Chart, PSI
| |
OUTSIDE
TEMPERATURE, DEGREES FAHRENHEIT |
| –30° |
–20° |
–10° |
0° |
10° |
20° |
30° |
40° |
50° |
60° |
70° |
80° |
90° |
100° |
110° |
| 100% Propane |
6.8 |
11.5 |
17.5 |
24.5 |
34 |
42 |
53 |
65 |
78 |
93 |
110 |
128 |
150 |
177 |
204 |
| |
VAPOR
PRESSURE, PSI |
Propane Safety Information
Check List For Safe LP
Gas Use:
1. DO NOT use torches on or near combustible materials.
2. Inspect equipment daily.
3. Secure cylinders in a level, upright position. DO NOT invert or lay
cylinders on their sides.
4. Use only vapor equipment on cylinders equipped with vapor withdrawal
valves. Use only liquid equipment on cylinders designed for liquid withdrawal.
DO NOT invert vapor cylinders to dispense liquid.
5. DO NOT apply flame to cylinders to increase pressure.
6. DO NOT operate torches or any equipment if the odor of LP Gas (butane/propane)
is evident. Immediately shut off all valves and, using soapy water,
check all equipment for leaks.
7. LP Gas (butane/propane) is heavier than air which causes it to accumulate
in low areas. Check low areas for accumulation and ventilate. Be certain
all work areas are well ventilated.
8. Keep torches, open flame, and sources of ignition away from cylinders,
regulators, and hose.
9. Cylinder valves must be protected. DO NOT hoist cylinder by the valve.
10. Gloves should be used at all times. Long sleeves, long pants, and
boots are recommended.
11. Never leave a lighted torch unattended.
12. For more detailed information, consult your local LP dealer, Flame
Engineering, NPGA, NRCA, or NFPA Pamphlet 58. This information is provided
as a general guide for safe LP- Gas use and in no way constitutes a
complete safety program.
Daily Equipment Check
List
1. Be sure you have a fire extinguisher (type ABC) on the job, easily
accessible to each worker.
2. Check LP cylinders for dents, damage to collar, damage to valve or
corroded foot ring. Never hoist a cylinder by the valve. Secure cylinders
in an upright position. Know whether you are using LIQUID or VAPOR WITHDRAWAL.
3. Visually inspect all parts for damage and wear.
4. Using soapy water, check all connections and fittings for leaks.
DO NOT use a match or open flame.
5. Ignite torch. Check operation of valve and other adjustable parts.
SAFETY NOTES:
• When extinguishing a torch, shut off cylinder valve and allow
gas to burn out of lines.
• Be certain to comply with all safety guidelines and local
ordinances regarding the use of an open flame.
• Please contact Flame Engineering, your local LP-Gas dealer or
fire officials if you have questions regarding proper operating procedures
and safety guidelines.
CAUTION:
• Propane is heavier than air which causes it to accumulate in
low areas. Be certain all areas are well ventilated.
• Propane has a distinct odor. If you smell it, immediately discontinue
work, extinguish all flames, find the leak and correct it.
WARNING:
Use extreme caution at all times. You are using an intense open flame.
Disregard of safe practices can result in severe fire damage, serious
personal injury or death.
|
FLAME ENGINEERING, INC.
P.O. Box 577 • West Highway 4
LaCrosse, Kansas 67548
Email: flame@flameengineering.com
Toll Free Mon - Fri 8 a.m -5 p.m. cst
1-888-388-6724
|
_
